Filter by Category

Gare Dazzle Dip Clear Glaze

Product Temporarily Unavailable

Due to a significant increase in supplier costs, the price of Gare Dazzle Dip Clear Dipping Glaze has risen substantially. As a result, Cromartie is currently not stocking this item.

If you would still like us to bring this glaze in, please register your interest by emailing Enquiry regarding Dazzle Dip Glaze .

Gare Dazzle Dip Clear Glaze for Bisqueware

Gare Dazzle Dip clear glaze is a clear dipping glaze for bisqueware and pottery painting, designed to give decorated ceramic pieces a transparent fired finish. Although this product is currently unavailable from Cromartie, this page keeps the product information, viscosity guidance and MSDS link together for customers who already use or are searching for Dazzle Dip glaze.

The supplied product information describes Dazzle Dip as a user-friendly, non-toxic lead-free dipping glaze with a smooth liquid consistency for dipping bisque. Once fired to Cone 06, it is intended to produce a clear, glass-like finish over decorated ceramic work.

Gare Dazzle Dip Glaze Details

Product: Gare Dazzle Dip Clear Dipping Glaze
Use: clear glaze for bisqueware and pottery painting
Firing: Cone 06
Viscosity time using a white cup: 18–20 seconds
Viscosity time using a black cup: 11–13 seconds using the Gare Black Viscosity Cup
Finish: clear glass-like fired appearance
Safety information: non-toxic and lead free according to the supplied product information

Directions for Using the Gare Black Viscosity Cup

The viscosity cup is used to measure glaze viscosity, consistency and thickness before dipping. For Gare Dazzle Dip Clear Glaze, use the following method to check the glaze before application.

Prime your new viscosity cup by washing it with warm water and soap, then rinse well.
Thoroughly mix the dipping glaze with a drill-powered Jiffy mixer.
Submerge the viscosity cup straight down into the glaze until full, making sure not to swirl the cup or create a vortex.
Remove the cup straight up from the glaze. As it clears the surface, use a stopwatch to begin timing the flow from the drain hole at the bottom.
Stop the timer when the steady stream of glaze breaks. This gives you the measurement of glaze consistency.
If the measurement is too high, adjust the viscosity by adding small quantities of distilled water and recheck the result.
Clean the viscosity cup after each use, giving special attention to the recess around the drain hole. Do not use metal tools to clean this area; use a soft bottle brush.

Important note: The Gare Black Viscosity Cup has a larger volume and drain hole than the previous Dupont cup. This creates a faster stream of glaze, which is why the recommended reading for Gare Dazzle Dip Clear Glaze is 11–13 seconds when using the black cup.

View Cromartie Colours Clear Dipping Glaze Browse Other Clear Glaze Options

Download the Gare Dazzle Dip MSDS

Show In Stock Only

Filter Results

Items per page