Instructional Videos for Cromartie Skutt Kilns
Product Showcase
Featured Skutt/Cromartie kiln kit and accessories videos.
GlazeTech
Glaze research specialist Andy Balmer (Pratt & Larson Tile, Portland Oregon) explains why he recommends
the GlazeTech Cone 10 test kiln for efficient glaze testing and repeatable results.
Skutt / Dawson KilnSitter Operation & Adjustment
A quick guide from Skutt on how the Dawson KilnSitter works, correct cone placement,
setting and adjusting the trigger, and routine safety checks for consistent, reliable firings.
Setting Up & Installing Your Kiln
New kiln arriving or moving your kiln to a new space? These short videos cover best practice for location,
safe unpacking, assembly, basic adjustments, and first-fire prep — plus installing the
EnviroVent 2 extraction system.
Choose Kiln Location
Guidance on ventilation, clearance, flooring and power — how to choose a safe, practical spot for your electric kiln.
Inspect Packaging
What to check on arrival and how to document courier damage before you unbox.
Unpacking Your Kiln
Step-by-step unboxing tips to protect bricks, elements and hardware during removal.
Disassemble Your Kiln
How (and when) to split a sectional kiln for safe moving through doorways and tight spaces.
Reassemble Your Kiln
Re-stacking sections, checking seals and wiring, and levelling the kiln for even firings.
Lid Tension
Adjusting springs and hardware so the lid opens smoothly and closes safely.
Prepping: Vacuuming Your Kiln
Why and how to remove brick dust and debris before your first (or next) firing.
Prepping: Coating Shelves
Applying kiln wash correctly to protect shelves and make glaze drips easy to remove.
Prepping: Test Firing
First-fire checklist to settle elements, burn off binders and confirm controller settings.
Skutt EnviroVent 2 Installation
How to fit and route the EnviroVent 2 system for effective kiln ventilation and fume extraction.
Operating Your Kiln
Everyday kiln use, safe loading, and controller know-how. These short clips cover best practice for
power-up, loading and peep plugs, plus a complete tour of the
KilnMaster features and programming (Cone Fire, Ramp/Hold, advanced options and more).
Powering Up Your Kiln
Safe start-up checks before every firing.
Loading Your Kiln
Stacking tips for even heatwork and happy shelves.
Placing Peep Plugs
When to leave peeps open/closed for safe venting.
Using Your Kiln – Lid Prop
How and when to prop the lid safely.
Using Your Kiln – Lid Brace
Set and secure the lid brace correctly.
Prepping – Test Firing
First-fire checklist to verify performance.
Prepping – Coating Shelves
Apply kiln wash for easy clean-up and shelf protection.
Kiln Loading Webinar
Deep dive into loading strategy and spacing.
KilnMaster – Menu Features (Overview)
Quick tour of the KM controller’s main options.
KilnMaster – Reset
Return safely to default settings.
KilnMaster – Two-Key Start
Extra safety when beginning a program.
KilnMaster – Max Temperature
Check/set maximum kiln temp limit.
KilnMaster – Check Amperage
Verify element draw for diagnostics.
KilnMaster – Check Voltage
Confirm supply voltage at the controller.
KilnMaster – Temperature Scale
Switch between °C and °F.
KilnMaster – Preheat
Gentle moisture removal before firing ramps.
KilnMaster – STOP Key
Safely halt a program mid-cycle.
KilnMaster – START Key
Begin a program (and re-start after pause).
KilnMaster – Review
Check your settings before you fire.
KilnMaster – Cone Table
Pick the right cone & schedule quickly.
KilnMaster – View
See program details during a run.
KilnMaster – Alarm
Set audible alerts for key events.
KilnMaster – Delay
Schedule your firing to start later.
Programming – Before, During & After
Workflow and best practice around each firing.
Programming – Idle Mode
Hold safe temperature between firings.
Programming – Run a Stored Program
Recall and fire previously saved schedules.
Programming – Ramp/Hold Mode
Build custom multi-segment programs.
Programming – Cone Fire Mode
Fire by cone with tried-and-tested schedules.
Programming – Choosing a Firing Mode
Pick the right mode for your project.
Programming – Cone Correlation
Match controller temp to witness-cone results.
Programming – Advanced: COOL
Controlled cool-down for crystal/glaze effects.
Programming – Advanced: 16-Segment Program
Maximum control with up to 16 segments.
Performing Kiln Repairs & Troubleshooting
Maintenance and fault-finding for Skutt/Cromartie electric kilns: tightening hardware, replacing
thermocouples, elements and bricks, plus core diagnostics using witness cones, error codes
and the controller’s tools.
Maintenance – Tightening Bands & Hardware
Keep sections snug to protect bricks and elements.
Replacing the Thermocouple
How to change a worn probe and route the leads correctly.
Replacing the Elements
Remove old coils, fit new ones and make secure connections.
Replacing a Firebrick
Swap damaged bricks and restore the liner safely.
Troubleshooting – 4 Basic Indicators
Quick checks that instantly narrow down issues.
Troubleshooting – Visual Inspection
What to look for inside the kiln and control box.
Troubleshooting – Witness Cones
Use witness cones to verify heatwork and calibration.
Troubleshooting – Diagnostic Software
Leverage Skutt’s tools and logs for faster diagnosis.
Troubleshooting – Error Codes
What the common controller errors mean and fixes.
For any other kiln technical enquiries, please contact our team on
01782 344253
or visit our
Kiln Technical Support page
.