Dawson Kiln Sitter Spares

Dawson Kiln Sitter Spares & Replacement Parts

A Dawson Kiln Sitter is a mechanical shut-off device used on certain manually controlled kilns. It uses a pyrometric cone that responds to heatwork - the combined effect of temperature and time - to trigger the kiln to switch off as the cone softens and bends.

Browse replacement parts including firing gauges, cone supports, sensing rods and tube assemblies, alongside complete Model K Kiln Sitter units. Use the diagram and expandable parts reference list below to help identify the component you need, then check the individual product details before ordering.

If you are unsure which part you need, or cannot find it listed, contact our technical team on 01782 319435. Please have your kiln details and Kiln Sitter model available. Installation and adjustment should follow the manufacturer's instructions and be carried out by a suitably qualified person.

Dawson Kiln Sitter parts diagram - click to view full size

Click the diagram to view full size in a new tab.

View Dawson Kiln Sitter Parts List

Reference list transcribed from the original scanned document. Original numbering and descriptions have been retained. Inclusion in this list does not indicate current availability or suitability for every Kiln Sitter model.

Part No. Description
1.Gauge, firing
2.Pr. Cone Supports
3.Sensing Rod, (advise model and kiln wall thickness)
4. Tube assy. (advise model and kiln wall thickness)
2 1/2"5" 3"5 1/2" 4"6" 4 1/2"7"

5.Washer
6.Brass Nipple only
6a.Brass Nipple with Swivel (short)
6b.Nipple with Swivel (long)
8.Washer, tube nut
9.Not only, tube
9a.Nut with Swivel, tube
15.Plunger Assembly
16a.Claw with Set Screw
16b.Guide Plate only
18.Screw, 6/32 x 1/4"
19.Set Screw, 6/32 x 1/8"
24.Paper Washer, Center post
26.Spring, center post
29.Set Screw. 8/32 x 3/8"
30.Pivot Pin
31.Lock
32.Spring, lock
33.Retainer, lock spring
34.Screw, 4/40 x 1/4"
35.Retainer, locking cam or lock
36.Screw, lock spring 4/40 x 1/8"
37.Screw, 3/8" x #6 metal
38.Screw, 3/8" x #8 metal
40.Box, (LT-3-P) Large opening
42.Heat Baffle, (LT-3-P) Off center hole
43.Retainer, spring ring
44.Counterweight, tube (P & LT-3) 4",
45.Counterweight, tube (P & LT-3) 5",
46.Counterweight, tube (P & LT-3) 4 1/2", 5 1/2"
47.Counterweight, tube (P & LT-3) 6",
48.Counterweight, tube (P & LT-3) 7"
68.Spring Grip
70.Tube assembly, short, K and LT-3K
(measures 6" from end of porcelain to end of bracket)
70a.Tube assembly, long. K and LT-3K
(measures 7" from end of porcelain to end of bracket)
71.Screw, center post 6/32 x 5/16"
72.Lock Washer, center post screw
75.Center Post
75a.Center post assembly, (1) #24, #26, #71, #72, #75
76.Nut, switch mounting 4/40 radio
78.Stand-off Bushing, switch mounting
80.Screw, flat head 6/32 x 5/16"
81.Screw, switch mounting 4/40 x 1 1/2" oval head
93.Nylon washer, switch mounting
94.Switch block only
95.Switch block with contacts less center post & spring
95a.Switch block #94 with contacts, center post and spring
95b.Switch block assy. with #95a and #15 plunger assy.
96.Rear contact, modified
97.Nylon washer, contact
98.Nut, contact
99.Screw, 10/32 x 3/8"
100.Front Plate Assembly ("P-4 7/8" x 5 7/8") with #102, #103, #29, #30 less #16a and #16b
101.Front Plate Assembly ("K-4 7/8" x 5 7/8") with #102, #103, #29, #30 less #16a and 16b
102.Trigger (1/16" x 1 1/8")
103.Weight only (1/16" x 3/4" cavity)
310.Bracket, tube