Tile Extruder Pugmill 3 Phase for Clay Tile Production
The Tile Extruder Pugmill 3 Phase is a specialist clay tile extruder for pottery studios, ceramic workshops and small clay manufacturers that need reliable tile production from prepared clay. Designed around a de-airing pugmill principle, it combines powerful clay extrusion with a purpose-designed tile nose cone for producing ceramic tiles, mouldings, coils and other extruded forms.
Supplied with a standard 100mm diameter nose cone, this tile extruder pugmill can produce tiles up to approximately 280mm wide and 25mm thick, with smaller or thinner tiles possible using accessory die plates fitted to the front of the nose cone. The machine can be finely tuned using variable blades, helping operators adjust performance for clay moisture, die balance, tile shape and extrusion requirements.
- Specialist clay tile extruder for reliable tile production from prepared clay
- Combines powerful clay extrusion with a purpose-designed tile nose cone
- Can also extrude mouldings, coils and hollow forms with optional die plates
- Smaller or thinner tiles can be produced using accessory die plates
- Variable blades allow the machine to be finely tuned
- Practical choice for users willing to test and refine clay moisture, die balance and extrusion setup
- Split body design helps with cleaning and maintenance
Technical Specifications
|
Specification
|
Details
|
|
Stock code
|
CH7160
|
|
Product type
|
Tile extruder pugmill / clay tile extrusion machine
|
|
Application
|
Ceramic tile production, clay extrusion, mouldings, coils and hollow forms
|
|
Suitable for
|
Pottery studios, ceramic workshops and small clay manufacturers
|
|
Design principle
|
Built around the standard de-airing pugmill design principle
|
|
Tile nose cone
|
Standard 100mm diameter tile nose cone supplied with the machine
|
|
Maximum tile size
|
Up to approximately 280mm wide and 25mm thick
|
|
Vacuum pump
|
High volume oil immersed
|
|
Drive motor
|
2.2kW / 3hp reduction drive gearbox direct drive
|
|
Motor gearbox
|
Larger high-torque motor gearbox unit for tile extrusion work
|
|
Voltage
|
230v single phase / 400v three phase
|
|
Clay output
|
Approximately 500kg per hour
|
|
Tile nose cone output
|
Approximately 60/80 sq ft per hour
|
|
Dimensions
|
1905mm L x 690mm W x 1050mm H
|
|
Delivery weight
|
Approximately 270kg
|
|
Construction
|
Cast aluminium 200mm barrel with 100mm tile nose cone extrusion
|
|
Body
|
Split body to facilitate easier cleaning
|
|
Blades
|
Variable blades allow the machine to be finely tuned
|
|
Optional die plates
|
Accessory die plates can be fitted to the front of the nose cone for smaller or thinner tiles, mouldings, coils and hollow forms
|
|
Optional extras
|
Variable speed and stainless steel pack
|
|
Finish
|
Durable powder-coated finish
|
Note: Tile extrusion performance can vary depending on clay body, moisture level, die balance, tile shape and operator setup. Testing and adjustment are normally required to achieve the best results.