Wet Back Spray Booth with Stand for Ceramic Glaze Spraying
The Wet Back Spray Booth with Stand is a waterwash ceramic glaze spray booth designed for pottery studios, ceramic workshops and educational facilities that need a portable spraying solution for low-volume glaze application. Using a continuous recycling water curtain, it helps capture glaze overspray while providing a controlled area for studio spraying.
This CH7076A wet back spray booth guides sprayed glaze towards the rear water curtain using an extraction fan, allowing the glaze to be trapped by the water before the air stream passes through a washable stainless steel pre-filter and filter bag. Mounted on four castor wheels, it is designed to be portable around the studio and is especially suited to studio potters, schools and ceramic departments.
- Portable spraying solution for low-volume glaze application
- Helps capture glaze overspray while providing a controlled area for studio spraying
- Guides sprayed glaze towards the rear water curtain using an extraction fan
- Excess glaze is washed into the tank for later removal or possible reclaim
- Useful for studios wanting a more controlled glaze spraying area
- Especially suited to studio potters, schools and ceramic departments
Technical Specifications
|
Specification
|
Details
|
|
Stock code
|
CH7076A
|
|
Product type
|
Wet back spray booth / waterwash ceramic glaze spray booth
|
|
Application
|
Low-volume ceramic glaze spraying in studio and education environments
|
|
Suitable for
|
Pottery studios, ceramic workshops, studio potters, schools, ceramic departments and educational facilities
|
|
Spray system
|
Continuous recycling water curtain
|
|
Fan
|
3.3 amps extraction fan
|
|
Pump
|
3.3 amps
|
|
Power supply
|
220–240v single phase
|
|
Filtration
|
Washable stainless steel pre-filter and washable filter bag
|
|
Drainage
|
Ball valve fitted to drain water and remove tank contents
|
|
Mobility
|
Mounted on four castor wheels
|
|
Material suitability
|
Water-based spray materials only
|
|
Dimensions
|
1655mm H x 800mm W x 1290mm D
|
|
Internal hood dimensions
|
638mm H x 625mm W x 420mm D
|
|
Working depth
|
Approximately 350mm
|
|
Delivery weight
|
Approximately 130kg
|
Note: This wet back spray booth is intended for water-based materials only. Waste water, glaze residue and filter contents should be cleaned and disposed of according to relevant local water authority, environmental and health and safety requirements.