Brush-On Raku Glaze for a White Crackle Effect
White Crackle Raku Brush-On Glaze creates a white crackle-effect surface through the Raku firing process. Its naturally variable appearance suits decorative ceramic pieces where the crackle response and differences between firings are intended to contribute to the finished design.
Choose the 500ml liquid brush-on format when you want to apply the glaze directly rather than prepare a powdered mixture. Stir thoroughly, apply three coats and allow each layer to dry before adding the next, then test the complete firing and reduction process because the final colour and appearance can vary considerably.
- Keep the applied glaze thickness consistent across comparison pieces
- Test the complete process before glazing important ceramic work
- Treat reference results as a guide rather than an exact colour guarantee
|
Specification
|
Details
|
|
Product type
|
Milton Bridge brush-on Raku glaze
|
|
Volume
|
500ml
|
|
Format
|
Liquid brush-on glaze
|
|
Effect
|
White Crackle effect
|
|
Application
|
Stir well and apply three coats, allowing each layer to dry
|
|
Kiln type
|
Electric or gas kiln
|
|
Firing range
|
920°C–1050°C
|
|
Firing duration
|
30 minutes to 1 hour
|
|
Post-firing process
|
Remove the piece after firing, place it in a can or pit containing reduction media, allow it to cool and then place it in water
|
|
Safety and food use
|
Lead free; not considered food safe due to the properties of the raw materials
|